Belkin NetCam HD+

From Exploitee.rs
Jump to navigationJump to search
BelkinNetCamHDp.jpg
BelkinNetCamHDp-2.jpg

This is a cloud exclusive wifi webcam. For the moment it only works with Belkin cloud powered by seedonk.

Information

  • Name: Belkin NetCam HD+
  • Model: F7D7606v1
  • Code: 8830-188851 Rev. B00
  • Latest Firmware version: WeMo_NetCam_WW_2.00.7217.PVT

Hardware Specs

More Information

It has a switch with two position. The "Gear/Configuration mode" to configure the device and the "Webcam Mode" that will turn on the webcam and connect it to the wifi network.

It has three leds on the back. The gear, wifi icon and power icon. The power icon lights up when plugged, the gear icon lights up on "Gear/Configuration Mode" and the wifi icon lights up on "camera mode" when the device connects to a wifi network. The wifi icon blinks when it is on "Gear/Configuration Mode"

Configuration - Belkin Way

To configure the device you need to put it on "Gear/Configuration mode". It will start a new wifi network called "NetCamHDAC00". You require an Android or iOS device and install the "Belkin WebCam" application. From that application you need to follow the instructions to connect it to the Belkin cloud.

MobileConfig001.png MobileConfig002.png MobileConfig003.png MobileConfig004.png MobileConfig005.png MobileConfig006.png MobileConfig007.png MobileConfig008.png MobileConfig009.png

On "Gear/Configuration Mode" the device will create a wifi network and assign to itself "10.68.68.22" IP with Subnet Mask "255.255.255.0". It will assign IPs from 10.68.68.100 to up to any device that will connect that SSID.

You can not configure this webcam with the browser. When you access the "10.68.68.22" IP it will ask you for an unknown userid and password.

BelkinAuthenticationRequired.png

Using the Device

This device can be used from:

  • Belkin Cloud: Using a Browser from the Belking service [1] powered by seedonk. It requires a iSecurity+ player plugin or Flash installed.
  • Belkin Cloud: Mobile: using the Belkin Webcam application powered by seedonk. Android, iOS.

Testing the Device

Port Scanner

On a working device connected to the same network, using a port scanner you can find that the webcam shows two ports opened:

  • Port 80 - Commonly used for Hypertext Transfer Protocol.
  • Port 421 - Commonly used for SSL protocol.

Pictures

Disassembly

Links