View source for Netgear NeoTV Prime

__FORCETOC__
{{Disclaimer}}
[[File:Neotv-prime.jpg|200px|left|thumb]]
[[Category:Netgear]]
This page will be dedicated to the hardware specifications, descriptions, and information related to the Netgear NeoTV Prime (GTV100).

== Purchase ==
Buying Google TV devices is expensive and, in a lot of cases our testing leads to bricked equipment. If you would like to help support our group, site, and research please use one of the links below to purchase your next Google TV.

[http://www.amazon.com/gp/product/B00AM0ESC4/ref=as_li_ss_tl?ie=UTF8&tag=gtvcom-20&linkCode=as2&camp=1789&creative=390957&creativeASIN=B00AM0ESC4 Purchase the Netgear NeoTV Prime at Amazon]

== Specs ==
These specifications are unverified, but based off of the SOC this should hold to be "trueish".
We will update this once the hardware ships.
*Marvell Armada 1500(88DE3100) 1.2 GHz dual-core processor, with a 750 MHz GPU
*1 GB DDR3 Memory 
*4 GB Flash NAND
*Single USB Port
*IR Blaster

== Gallery ==
<gallery>
File:Gtv100-remote.png
File:Gtv100-label.png
File:Mobo-neotvprime.jpg
</gallery>

== Connections / Connectors / Switches ==
*CN1 - UART (115200 8n1)
*CN3 - SPI ?
*CN4 - WiFi/BT
*CN6 - USB?
*SW2 - Factory Restore

== Update History ==
GTV-1.0.3.r0098-SDK1065.HC15848.PV01.09-RC1 - Initial Factory Version

== PrimePwn ==
PrimePwn is our automated root process. It works by leveraging a debug service that is called "testmode", which checks for a USB drive with a file named “.testmode” containing the magic string “testmodemark”. The system then checks to see if the file contains the magic string “testmodemark”. If the system finds the file, it sets the “persist.radio.testmode.enabled” property to 1 and reboots. Then, if the device detects this property as 1 upon boot, it attempts to copy and then extract a file named “test_mode.tgz” from the USB drive to /tmp/. After extracting, the system tries to run a sh file named “/tmp/test_mode/test_mode.sh”. Assuming we set the permissions correctly this file will allow us to run the payload of our choosing as root.

[[File:File:Netgear-NeoTV-Prime-testmode-Root-Process.jpg]]

The Following are Automatically Performed:

    Installs SuperSu.apk
    Disables automatic updates
    Modifies flash plug-in to allow streaming of Hulu and other previously blocked content providers

Neo TV “PrimePwn” Root Process:

1.) Download PrimePwn.zip
2.) Extract the PrimePwn.zip to a Fat32 formatted USB drive. (test_mode.tgz, .testmode, README)
3.) Put the USB drive into your NeoTV Prime and reboot.
4.) Let the process run, it will reboot a few times and then will end at the home screen. (Approximately 3 minutes later)
5.) Remove your USB drive.