Difference between revisions of "Sony Settings Menus"
From Exploitee.rs
Jump to navigationJump to search
(Extend list. More yet to be added.) |
(Finish the list) |
||
Line 1: | Line 1: | ||
Because I found these menus so disorganized that I needed to write them down. Also for handy reference when helping other GTV users. | Because I found these menus so disorganized that I needed to write them down. Also for handy reference when helping other GTV users. These are taken from an NSZ-GT1 Blu-ray Google TV running 3.2 root. Owners of the TV model can note any differences as they see them. | ||
'''Settings''' | '''Settings''' | ||
Line 5: | Line 5: | ||
*:Manage Internet Connection | *:Manage Internet Connection | ||
**'''Ethernet''' | **'''Ethernet''' | ||
**'''Wi-Fi''' | |||
**'''Status''' | |||
**:View detailed network status | |||
***'''IP address''' | |||
***'''Ethernet MAC address''' | |||
***'''Wi-Fi MAC address''' | |||
***'''Local network''' | |||
***'''Internet''' | |||
***'''Ethernet''' (connection status) | |||
***'''Wi-Fi''' (connection status) | |||
***'''Private network''' | |||
**'''Home network setup''' | |||
**:Set up home network connections | |||
***'''Edit device name''' (default = Sony Internet TV) | |||
***'''Manage paired remote applications''' | |||
***:Remove pair remote application for mobile | |||
*'''Video input''' | *'''Video input''' | ||
*:Set up TV service provider | *:Set up TV service provider | ||
*:Lists configured devices. Scans for sources and allows manual addition of devices. | |||
**'''Edit channel list''' | |||
**:Select the channels this device receives | |||
**'''IR Blaster settings''' | |||
***'''Advanced settings''' | |||
****'''Zero padding''' (2..6 digits. Default = Minimum) | |||
****:Set the channel number digits | |||
****'''Key interval''' (100..1000 by 50s. Default = 250 msec) | |||
****:Set the transmission interval for the channel number | |||
****'''Send an "Enter" command (checkbox. Default = checked) | |||
****:Send an "Enter" command after the channel number | |||
****'''Test''' (launches test) | |||
****:Check if the setting is correct | |||
***'''Type''' (non-clickable) | |||
***'''Code''' (allows manual entry of code) | |||
**'''HD channels''' (checkbox. Default = checked) | |||
**:Enabled access to HD channels | |||
**'''Disconnect device''' | |||
**'''Default TV device''' | |||
**'''Edit channel lineup''' (launches provider selection) | |||
*'''TV & AVR''' | *'''TV & AVR''' | ||
*:Set the IR Blaster to control the TV & AV Receiver | *:Set the IR Blaster to control the TV & AV Receiver | ||
**'''TV control setting''' (opens manufacturer list) | |||
**'''AV Receiver setting''' | |||
***'''Control with IR Blaster''' (checkbox) | |||
***:Mark the checkbox to control the AV Receiver with the IR Blaster | |||
***'''Manufacturer''' (manually sets manufacturer) | |||
***'''Code''' (manually sets code) | |||
***'''IR Blaster test''' (launches test) | |||
**'''Enable TV control''' (checkbox) | |||
**:Mark the checkbox to control the TV with the IR Blaster | |||
**'''TV & volume control settings''' | |||
**:Available when Enable TV control is set to On | |||
***:You can check if the setting is correct | |||
*'''Picture & sound''' | *'''Picture & sound''' | ||
*:Adjust the picture and sound | *:Adjust the picture and sound | ||
Line 80: | Line 128: | ||
***'''Pico TTS''' | ***'''Pico TTS''' | ||
***:Pico TTS settings | ***:Pico TTS settings | ||
*'''Disc Player settings''' | *'''Disc Player settings''' | ||
*:Change general settings | *:Change general settings |
Revision as of 05:18, 9 March 2012
Because I found these menus so disorganized that I needed to write them down. Also for handy reference when helping other GTV users. These are taken from an NSZ-GT1 Blu-ray Google TV running 3.2 root. Owners of the TV model can note any differences as they see them.
Settings
- Network
- Manage Internet Connection
- Ethernet
- Wi-Fi
- Status
- View detailed network status
- IP address
- Ethernet MAC address
- Wi-Fi MAC address
- Local network
- Internet
- Ethernet (connection status)
- Wi-Fi (connection status)
- Private network
- Home network setup
- Set up home network connections
- Edit device name (default = Sony Internet TV)
- Manage paired remote applications
- Remove pair remote application for mobile
- Video input
- Set up TV service provider
- Lists configured devices. Scans for sources and allows manual addition of devices.
- Edit channel list
- Select the channels this device receives
- IR Blaster settings
- Advanced settings
- Zero padding (2..6 digits. Default = Minimum)
- Set the channel number digits
- Key interval (100..1000 by 50s. Default = 250 msec)
- Set the transmission interval for the channel number
- Send an "Enter" command (checkbox. Default = checked)
- Send an "Enter" command after the channel number
- Test (launches test)
- Check if the setting is correct
- Zero padding (2..6 digits. Default = Minimum)
- Type (non-clickable)
- Code (allows manual entry of code)
- Advanced settings
- HD channels (checkbox. Default = checked)
- Enabled access to HD channels
- Disconnect device
- Default TV device
- Edit channel lineup (launches provider selection)
- TV & AVR
- Set the IR Blaster to control the TV & AV Receiver
- TV control setting (opens manufacturer list)
- AV Receiver setting
- Control with IR Blaster (checkbox)
- Mark the checkbox to control the AV Receiver with the IR Blaster
- Manufacturer (manually sets manufacturer)
- Code (manually sets code)
- IR Blaster test (launches test)
- Control with IR Blaster (checkbox)
- Enable TV control (checkbox)
- Mark the checkbox to control the TV with the IR Blaster
- TV & volume control settings
- Available when Enable TV control is set to On
- You can check if the setting is correct
- Picture & sound
- Adjust the picture and sound
- 3D settings
- Change the 3D viewing environment
- 3D output setting
- Choose whether to output in 2D or 3D
- Auto/Off (default = Auto)
- TV screen size setting for 3D BD
- Set the screen size for 3D Blu-ray movies
- Three-digit selector for screen size in inches. (default = 46)
- Resolution
- Select preferred TV resolution
- Auto/1080p/1080i/720p (3D will not work unless set to Auto. Default = Auto)
- Picture size (launches overscan calibration utility from initial setup)
- Maximize your screen area
- Screen format
- Set the source's aspect ratio when it differs from the TV
- Original/Fixed aspect ratio (default = Original)
- YCbCr/RGB (HDMI
- Set the color space conversion for the video signal from HDMI
- Auto/YCbCr(4:4:4)/RGB (default = Auto)
- Noise reduction
- Reduce repetitive random noise
- High/Medium/Low/Off (default = Off)
- Screen saver
- Set the screen saver
- Off/10 min/30 min/1 h/2 h/3 h
- Audio (HDMI) (inactive)
- Audio output priority
- Set the jack type for audio equipment connection
- HDMI/Optical (default = HDMI)
- BD audio mix setting
- Set whether to mix interactive audio and output
- On/Off (default = On)
- Dolby Digital (Optical)
- Set the Dolby Digital output signal from DIGITAL OUT
- Off (Downmix PCM)/On (default = On)
- Dolby Digital pass-through
- Send Dolby Digital signals from HDMI devices to your audio system
- On/Off (default = On)
- DTS (Optical)
- Set the DTS output signal from DIGITAL OUT
- Off (Downmix PCM)/On (default = On)
- Audio DRC
- Set the sound effect when playing a BD or DVD
- Auto/Standard/TV mode/Wide range (default = Auto)
- Downmix
- Apply the surround effect to the output audio signal
- Surround/Stereo (default = Surround)
- AV sync
- Adjust the timing between picture and sound
- 0-120 msec at increments of 10 msec
- Sound effects (checkbox. Default = unchecked)
- Enable sound effects
- Notification sounds (Silent/Default. Default = Silent)
- Text-to-speech
- Listen to an example
- Play a short demonstration of speech synthesis
- Always use my settings (checkbox. Default = unchecked)
- Default settings below override application settings
- Default Engine (only option is Pico TTS)
- Sets the speech synthesis engine to be used for spoken text
- Install voice data
- Install the voice data required for speech synthesis
- Speech rate
- Speed at which the text is spoken
- Very slow/Slow/Normal/Fast/Very fast
- Language (only option is English (United States))
- Sets the language-specific voice for the spoken text
- Pico TTS
- Pico TTS settings
- Listen to an example
- Disc Player settings
- Change general settings
- Timer
- Set timer to power on or off
- Displays artsy clock. Allows multiple setting timers for on or off (or so it appears) to time, day of week, and duration, as well as sleep timer of 15-120 minutes.
- Eco
- Change the settings related to power consumption
- Quick start
- Set the unit to power on quickly
- On/Off. Unit powers on much more quickly but consumes more power while powered off.
- Auto standby
- The unit automatically turns off after 2 hours of non-operation.
- On/Off (default = Off)
- HDMI settings
- Change the settings for controlling compatible HDMI devices
- Control for HDMI
- Control the unit with the HDMI-connected TV
- On/Off (default = On)
- Unit auto power off
- Power off unit when the HDMI-connected TV is turned off
- On/Off (depends on previous option On. Default = Off)
- Cinema conversion mode
- Set the conversion method for video or film material
- Auto/Video
- BD-ROM 1080/24p output
- Output a 1080/24p video signal from HDMI
- Auto/Off
- Auto display
- Display info when switching audio modes or during playback
- On/Off (default = On)
- BD/DVD viewing settings
- Set the language displayed on BD or DVD menus
- BD/DVD menu (opens language selector)
- Set the language displayed on BD or DVD menus
- Audio (opens language selector. Default = Original)
- Set the audio language when playing a BD or DVD
- Subtitle (opens language selector)
- Set the subtitle language when playing a BD or DVD
- BD Internet connection
- Allow Internet connection from BD content
- Allow/Do not allow (default = Do not allow)
- BD data management
- BD data management
- Erase BD data
- Used capacity listed
- Search
- Manage searchable items, clear shortcuts
- Searchable items (opens list of installed applications with checkboxes for each)
- Choose applications to search
- Clear shortcuts
- Clear shortcuts to recently chosen search suggestions
- Applications
- Manage applications and development options
- Manage applications
- Manage and remove installed applications
- View applications by Downloaded, All, or Running. View internal storage amount used/free and RAM amount used/free. View application storage use, access settings, and stop applications and services.
- Running services
- View and control currently running services
- Same as previous menu option, opening to different default page.
- Development
- Set options for application development
- Remote debugging (checkbox. Default = checked)
- Allow connections from debugging tools
- 'Debugger IP address (needs to be set to IP address of system you are running adb on)
- Mock locations (checkbox. Default = checked)
- Allow mock locations
- Input device
- Manage input devices, IP remotes
- Manage IP remotes
- Connect and disconnect IP remotes
- Connect to new IP remotes (checkbox. Default = checked)
- Accept new pairing requests
- Paired IP remotes list if configured
- Chrome to TV (launches feature setup)
- Push links to this device from Google Chrome
- Pointer speed (opens selection slider)
- Mouse and trackpad speed
- Current keyboard
- Configure current keyboard
- English (US) Keyboard (Android keyboard) / English Voice (Android keyboard) / Remote Keyboard
- Configure input methods (opens same panel as next option)
- Configure input methods (opens panel with inactive options)
- Configure input methods
- Accounts & sync
- Manage accounts and data sync
- Background data (checkbox. Default = checked)
- Applications can sync, send, and receive data at any time
- Auto-sync (checkbox. Default = checked)
- Applications sync data automatically
- Accounts listed if configured
- Option to add account
- Privacy & safety
- Manage privacy, safety and lock settings
- Reporting (checkbox. Default = unchecked)
- Automatically send Google TV usage statistics and crash reports to Google
- Factory data reset (I'm not going to see if this is clickable.)
- Video history (checkbox. Default = unchecked)
- Enable history of video watching such as TV channels
- Clear video history (depends on previous option checked)
- SafeSearch
- Block adult content from appearing in search results
- Strict filtering / Moderate filtering (default) / Do not filter
- Application lock
- Require PIN to use Google Chrome & Market
- Lock Google Chrome & Market (checkbox. Default = unchecked)
- Change PIN (depends on previous option checked)
- Parental lock (launches prompt for "4 number" password)
- Block unwanted programs or content
- Back up my data (checkbox. Default = checked if Google account configured)
- Back up application data and other settings to Google servers
- Backup account (allows addition of account(s))
- Automatic restore (checkbox. Default = checked if Google account configured)
- If I reinstall an application, restore backed up settings or other data
- Storage
- Unmount USB storage, view available storage
- Total (non-clickable. 3.72GB for NSZ-GT1)
- Available (non-clickable)
- Enable FTP access (checkbox. Default = unchecked)
- Media storage devices listed if any are connected
- Date, time & location
- Set date, time, time zone and formats
- Automatic (checkbox. Default = checked)
- Use network-privded time
- Set date (depends on first option unchecked)
- Select time zone
- Set time (depends on first option unchecked)
- Use 24-hour format (checkbox. Default = unchecked)
- Select date format
- Set location (zip code)
- Accessibility
- Manage accessibility options
- Enable accessibility services (checkbox. Default = unchecked)
- TalkBack (checkbox. depends on first option checked. Default = unchecked)
- Download accessibility scripts (checkbox. depends on first option checked. Default = unchecked)
- Allow applications to download accessibility scripts from Google
- About
- System information
- System updates (checks for updates)
- System tutorial (launches tutorial)
- Model number (non-clickable)
- Firmware version (non-clickable)
- Build number (non-clickable)
- Contact Sony
- Website and phone contact for Sony product support
- Website support (opens website)
- United States phone contact (non-clickable)
- Model name (non-clickable)
- Serial number (non-clickable)
- Software version (non-clickable & shows no info)
- Disc drive version (non-clickable)
- Sub micro version (non-clickable)
- RF module version (non-clickable)
- Open source licenses (opens text window)
- Google legal (opens legal browser)
- Sony legal (opens legal browser)