Difference between revisions of "Belkin NetCam HD+"

From Exploitee.rs
Jump to navigationJump to search
Line 44: Line 44:
==Links==
==Links==
* [http://www.belkin.com/us/F7D7606-Belkin/p/P-F7D7606/ Official Site]
* [http://www.belkin.com/us/F7D7606-Belkin/p/P-F7D7606/ Official Site]
* [http://www.belkin.com/us/support-product?pid=01t80000003IPxUAAW Official Support Site]


[[Category:Cameras]]
[[Category:Cameras]]

Revision as of 16:59, 24 February 2015

BelkinNetCamHDp.jpg
BelkinNetCamHDp-2.jpg

Information

  • Name: Belkin NetCam HD+
  • Model: F7D7606v1
  • Code :8830-188851 Rev. B00

Hardware Specs

More Information

It has a switch with two position. The "Gear/Configuration mode" to configure the device and the "Webcam Mode" that will turn on the webcam and connect it to the wifi network.

It has three leds on the back. The gear, wifi icon and power icon. The power icon lights up when plugged, the gear icon lights up on "Gear/Configuration Mode" and the wifi icon lights up on "camera mode" when the device connects to a wifi network. The wifi icon blinks when it is on "Gear/Configuration Mode"

Configuration - Belkin Way

To configure the device you need to put it on "Gear/Configuration mode". It will start a new wifi network called "NetCamHDAC00". You require an Android or iOS device and install the "Belkin WebCam" application. From that application you need to follow the instructions to connect it to the Belkin cloud.

MobileConfig001.png MobileConfig002.png MobileConfig003.png MobileConfig004.png MobileConfig005.png MobileConfig006.png MobileConfig007.png MobileConfig008.png MobileConfig009.png

On Gear/Confirmation Mode the device will create a wifi network and assign to itself "10.68.68.22" IP with Subnet Mask "255.255.255.0". It will assign IPs from 10.68.68.100 to up to any device that will connect that SSID.

You can not configure this webcam with the browser. When you access the "10.68.68.22" IP it will ask you for an unknown userid and password.

BelkinAuthenticationRequired.png

Using the Device

This device can be used from:

  • Belkin Cloud: Using a Browser from the Belking service [1] powered by seedonk. It requires a iSecurity+ player plugin or Flash installed.
  • Belkin Cloud: Mobile: using the Belkin Webcam application powered by seedonk. Android, iOS.

Pictures

Links