HC3.1onRevue

From Exploitee.rs
Revision as of 18:50, 4 August 2011 by Resno (talk | contribs)
Jump to navigationJump to search

Download HC 3.1 for Revue


Whats this?

There is a way to install HC 3.1 on the Revue. The instructions follow. Along with that news, some other interesting things have emerged.

To install:

Copy the update.zip to a Fat32 formatted USB drive, place it in its root (ie /mnt/usb/update.zip or E:\update.zip)

Plug USB drive into Revue. Fully unplug revue. Plug it back in, count to One (a long one, say one mississippi), then hold down the connect button (keep it held). The Revue logo will come up, and the box will reboot, your tv will lose signal, and come back to the Revue logo. At this point, let go of the button.

The GTV logo will then show up, with an arrow and a horizontal "barbershop scroll". At this point, on your Revue's keyboard, press the FN key (in yellow) and the left arrow (to the left of the OK button). It will then come up to a recovery menu.

Hit "Apply update from sdcard:/update.zip"

The box will verify the update, and reboot. This is normal. It is installing an updated bootloader and recovery image (both, heavily encrypted).

Then, the box will come back on, and flash the latest kernel and system files. Once this is done, the box will reboot again.

This bootup may take a few minutes, at first you will see the Revue logo, then the Google TV logo, then the "new" logo (a grey tv over a ball glowing red). Just wait it out.

You can then begin setup, as normal. You may notice some crashes - this software is still beta, you should be able to force close and continue.

EDIT: There have been reports of issues proceeding with the honeycomb setup wizard that we are still looking into. Please at least for the time being refrain from installing the update unless youwant to risk not being able to use you're revue.